PU_VS-041110  lacquer is a high quality two component polyurethane lacquer. It is suitable for wood products indoor which requires high hardness of surface and for wooden floorings. It has good adhesion, anti-scratch, and water resistance – solvent resistance.

I.        FEATURES

*         Color: amber liquid

*         Solid content: 50±3%.

*        Various  sheen, no cracking, no peeling.

*         Good for all wood species and rich colors development as required

*        Meet/ exceed all the Strict Quality Test according to EU (REACH) & US (CPSIA) Performance Standards

II.      MIXING RATIO :

                -   PU sealer/ PU hardener/ PU thinner: 2/ 1/ 2

                -   PU_VS-041110 topcoat/ PU_VS-041110 hardener/ PU_TXXT thinner: 2/ 1/ 2

                -   Coverage ratio : 5-6m² / 1 Kg

III.    GENERAL PROCEDURE :

            1.      Timber surface processing:  Treat all mistakes on wood surface (if any), sanding.

            2.      Stain color or wood filling

            3.      PU Sealer: Mix sealeras recommended ratio 01 or 02 coats depends on requirement. Sanding after 60 – 90  minutes.  

4.      PU_VS-04110Topcoat: Mix coatings and colors as recommended ratio, completely spray 2 passes.

5.      Air-dry product, after 24 hours, packed.

IV.     PRESERVATION :

*        Product should be stocked at cool, dry condition and under 40⁰C.

*        Keep the tanks tightly closed before and after using

V.       SAFETY :

*        Product ingredients are flammable chemicals. Keep away from heat and fire.

Safety working gloves and gauze mask are a must when contacting product. Keep out of eyes, skin and mouth.