PUTXXT lacquer is a high quality two component Polyurethane lacquer. It specially uses for indoor wooden products. PUTXXT lacquer has good adhesion, fast drying, high build, and high durability.
* Color: Transparent or white liquid
* Gloss: 10 – 95%
* Solid content: 44 ± 3%
* High mar, water, alcohol resistance
* Hardness: >2H
* High adhesion, no blistering,
* Good for all wood species and rich colors development as required.
II. APPLICATION METHOD
* Sealer lacquer:
PU sealer / PU hardener / PU thinner.
2 / 1 / 2
* Topcoat lacquer:
PUTXXT lacquer / PUTXXT hardener / PUTXXT Thinner
2 / 1 / 1.5
* Viscosity (after mixing): 13 – 15 sec (by BS 4 Cup)
III. GENERAL PROCEDURES
1. Timber surface processing: Treat all mistakes on wood surface (if any), sanding.
2. Stain color or wood filling
3. PU Sealer by spray gun: 01 or 02 coats depends on requirement
4. PUTXXT Topcoat.
- Mixing Topcoat and color as instructed ratio. Completely spray 2 passes.
- Keep the products dry within 24 hours (depending on film thickness), then packing.
* Product should be stocked at cool, dry condition and under temperature at 26 – 300C.
* Keep the tanks tightly closed before and after using.
* Product ingredients are flammable chemicals. Keep away from heat and fire.
* Safety working gloves and gauze mask are a must when contacting product. Keep out of eyes, skin and mouth.