PU_HJFD lacquer is a high quality two component polyurethane lacquer. It is suitable for indoor & outdoor  wooden products. PU_HJFD lacquer has good adhesion, hardness, and high durability. Especially, PU_HJFD has fast drying and curing time.

I.     FEATURES

*     Color: transparent or white.

*     Gloss: 10 – 95%

*     Solid content: 52 ± 3%.

*     Good solvent, water resistance

*     Good adhesion, no peeling and no cracking

*     Good for all wood species and rich colors development as required

*      Meet/ exceed all the Strict Quality Test according to EU (REACH) & US (CPSIA) Performance Standards.

II.     APPLICATION METHOD

*    Mixing ratio:

PU_HJFD Topclear / PU_HXXT Hardener / PU Thinner.

               2            /         0.5                      /       1-1.5

PU_HJFD White Topcoat / PU_HXXT Hardener / PU Thinner

      2                 /          0.5                                  /       1-1.5

*   Coverage:  5m² / 1 kg

*    Viscosity (after mixed): 13 – 15 sec (by BS 4 Cup).

III.     GENERAL PROCEDURES:

1.   Timber surface processing:  Treat all mistakes on wood surface (if any), sanding.

2.   Stain color or wood filling

3.   PU Sealer by spray gun: 01 or 02 coats depending on requirement

4.   PU_HJFD Topcoat :  Mix Topcoat and color as instructed ratio. Completely spray 2 passes.

5.    Keep the products dry after 24 hours (depending on film thickness), then packing.

IV.       PRESERVATION

*     Product should be stocked at cool, dry condition and under temperature at 26 – 30⁰C.

*     Keep the tanks tightly closed before and after using.

V.      SAFETY

*     Product ingredients are flammable chemicals. Keep away from heat and fire.

*     Safety working gloves and gauze mask are a must when contacting product. Keep out of eyes, skin and mouth.